TM 5-3805-261-20
BODY, CAB, HOOD AND HULL MAINTENANCE.
13-10.
Cab Doors and Latch Assemblies. (Sheet 5 of 9)
REMOVAL
27.
Remove striker (65), shims (66) and plate
(67, Figure 13-39) from door post in
operators compartment.
28.
Remove four bolts (68) and washers (69)
from bracket (74).
29.
Remove four screws (70), two washers
(71), nuts (72), latch (73) and bracket (74).
NOTE
Remove
strip
only
if
inspection
indicates replacement is necessary.
30.
Remove and discard strip (75, Figure 13-
40), if necessary. Remove all old adhesive
from mounting.
31.
Remove retainer (76) and washer (77).
32.
Remove items 78 thru 80 as an assembly
from inside of operators compartment.
33.
Remove retainer (78) and ball (79) from
handle (80, Figure 13-41).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
Figure 13-39.
Figure 13-40.
Figure 13-41.
Go to Sheet 6
13-39