TM 5-3805-261-20BODY, CAB, HOOD AND HULL MAINTENANCE. (cont)13-10.CabDoorsandLatchAssemblies.(Sheet 8 of 9)INSTALLATION (cont)18.Install handle (29), two bolts (28), plate (27)and two nuts (26, Figure 13-34).19.Install plug (25).20.Install new seal (24), if removed. Cut tosize from adhesive backed bulk seal.21.Install new seal (23), if removed. Cut tosize from adhesive backed bulk seal.22.Install hinge (22) and 14 new rivets (21), ifremoved.23. Attach hoist and sling to items 64 thru 21 asan assembly of left door (Figure 13-33).24.Using hoist and sling, position items 64 thru21 as an assembly on cab. Aline with pencilmarks made previously.25.Install 14 washers (20), nuts (19) andscrews (18).26.Remove hoist and sling.27.Attach hoist and sling to items 64 thru 21 asan assembly of right door (Figure 13-32).28.Using hoist and sling, position items 64 thru21 on cab. Aline with pencil marks madepreviously.29.Install nine washers (17), nuts (16) andscrews (15).30.Install three washers (14), nuts (13) andscrews (12).Go to Sheet 913-42Figure 13-34.Figure 13-33.Figure 13-32.
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
