INSTALLATION - TM-5-3805-261-20

TM-5-3805-261-20 Grader Heavy Road Motorized (Caterpillar Model 130 G) Manual
Page Navigation
797

TM 5-3805-261-20 BODY, CAB, HOOD AND HULL MAINTENANCE. (cont) 13-10. Cab Doors and Latch Assemblies. (Sheet 6 of 9) INSTALLATION NOTE Steps 1 thru 22 of this installation procedure are for the left door components. The installation procedure for the right door components is identical. 1. Install ball (79) and retainer (78) on handle (80, Figure 13-41). 2. Install items 80 thru 78 as an assembly in rear of operator’s compartment (Figure 13- 40). 3. Install washer (77) and retainer (76). 4. Apply thin coat of adhesive to strip (75). Install new strip (75) on cab, if removed. 5. Install latch (73), two nuts (72), washers (71) and four screws (70) on bracket (74, Figure 13-39). 6. Install four washers (69) and bolts (68) on bracket (74). 7. Install plate (67), shims (66) and striker (65) in door post of operator’s compartment. 8. Install two washers (63), latch (62), two bolts (61), washers (60) and nuts (59) on door (64). Lubricate all moving parts of latch (62, Figure 13-38) with dry type lubricant. Go to Sheet 7 Figure 13-41. Figure 13-40. Figure 13-39. Figure 13-38. 13-40

Privacy Statement
Press Release
Contact