TM 5-3805-261-20
HYDRAULIC SYSTEM MAINTENANCE. (cont)
15-25.
Blade Tip Lines, Fittings and Hoses. (Sheet 5 of 10)
REMOVAL (cont)
13.
Remove bolt (32), washer (33) and clamp
(34, Figure 15-102).
14.
Remove bolt (35), washer (36) and clamp
(37) from inner, right side of drawbar.
15.
Remove two hose assemblies (38,Figure
15-103) from rear of drawbar.
16.
Remove two elbows (39) and preformed
packings (40) from circle drive swivel.
Discard two preformed packings (40).
17.
Disconnect hose assembly (47).
18.
Disconnect hose assembly (48).
19.
Remove elbow (41) and preformed packing
(42). Discard preformed packing (42).
20.
Remove elbow (43) and preformed packing
(44). Discard preformed packing (44).
21.
Remove two bolts (45) and clamps (46,
Figure 15-104).
Figure 15-102.
Figure 15-103.
Figure 15-104.
Go to Sheet 6
15-130
