TM 5-3805-261-20
HYDRAULIC SYSTEM MAINTENANCE. (cont)
15-25.
Blade Tip Lines, Fittings and Hoses. (Sheet 3 of 10)
REMOVAL (cont)
4.
Remove two bolts (6), washers (7), clamp
(8), two spacers (9),shim (10) and two
spacers (11, Figure 15-96) in front, right
side of cab.
5.
Remove two bolts (12), washers (13),
clamp (14) and two spacers (15).
6.
Remove two bolts (16), washers (17),
clamps (18) and four spacers (19, Figure
15-97) in rear, right side of front frame.
7.
Remove two bolts (20), washers (21) and
clamps (22, Figure 15-98) in center, right
side of front frame.
Figure 15-96.
Figure 15-97.
Figure 15-98.
Go to Sheet 4
15-128
