TM 5-3805-261-20
HYDRAULIC SYSTEM MAINTENANCE.
15-25.
Blade Tip Lines, Fittings and Hoses. (Sheet 2 of 10)
REMOVAL
NOTE
All hose and tube assemblies must
be tagged before disconnecting to
aid in installation. Cap all hose and
tube ends and plug all open hydraulic
ports to prevent contamination.
1.
Disconnect
two
hose
assemblies
(23,
Figure 15-93) from control valve group
(second assembly from outside) under
front, left side of cab.
2.
Remove two elbows (1) and performed
packings (2, Figure 15-94). Discard two
preformed packings (2).
3.
Remove two nuts (3), washers (4) and
clamp (5, Figure 15-95) under, left side of
cab.
Figure 15-93.
Figure 15-94.
Figure 15-95.
Go to Sheet 3
15-127
