TM 5-3805-261-20
HYDRAULIC SYSTEM MAINTENANCE. (cont)
15-25.
Blade Tip Lines, Fittings and Hoses. (Sheet 9 of 10)
INSTALLATION (cont)
20.
Install two spacers (19), clamps (18),
washers (17) and bolts (16, Figure 15-97) in
rear, right side of front frame.
21.
Install two spacers (15), clamp (14), two
washers (13) and bolts (12, Figure 15-96)
under front, right side of cab.
22.
Install two spacers (11), shim (10), two
spacers (9), clamp (8), two washers (7) and
bolts (6).
23.
Install clamp (5), two washers (4) and nuts
(3, Figure 15-95) under left side of cab.
Figure 15-97.
Figure 15-96.
Figure 15-95.
Go to Sheet 10
15-95