TM 5-3805-261-20
HYDRAULIC SYSTEM MAINTENANCE.
15-25.
Blade Tip Lines, Fittings and Hoses. (Sheet 4 of 10)
REMOVAL
8.
Remove two hose assemblies (23,Figure
15-99) from blade tip check and relief valve
in front, right side of front frame.
9.
Remove two elbows (24) and preformed
packings (25) from blade tip check and
relief valve. Discard two preformed packing
(25).
10.
Disconnect
two
hose
assemblies
(38,
Figure 15-100).
11.
Remove
two
connectors
(26)
and
preformed packings (27). Discard two
preformed packings (27).
12.
Remove two bolts (28), washers (29), plate
(30) and clamp (31, Figure 15-101) from
front, right side of drawbar.
Figure 15-99.
Figure 15-100.
Figure 15-101.
Go to Sheet 5
15-129
