TM 5-3805-261-20
HYDRAULIC SYSTEM MAINTENANCE.
15-25.
Blade Tip Lines, Fittings and Hoses. (Sheet 8 of 10)
INSTALLATION
15.
Install two new preformed packings (27)
and connectors (26, Figure 15-100) to blade
tip check and relief valve in front right side
of front frame. Refer to paragraph 15-13,
steps 2-4.
16.
Connect two hose assemblies (38) in blade
tip check and relief valve.
17.
Install two new preformed packings (25)
and elbows (24, Figure 15-99).
18.
Install two hose assemblies (23).
19.
Install two clamps (22), washers (21) and
bolts (20, Figure 15-98) in center, right side
of front frame.
Figure 15-100.
Figure 15-99.
Figure 15-98.
Go to Sheet 9
15-133
