TM 5-3805-261-20
HYDRAULIC SYSTEM MAINTENANCE. (cont)
15-24.
Blade Lift Lines, Fittings and Hoses. (Sheet 5 of 10)
REMOVAL (cont)
21.
Remove items 39 thru 42 as an assembly
(Figure 15-90) from left blade lift check and
relief valve. Refer to paragraph 15-18,
steps 7 - 10.
22.
Disconnect
two
hose
assemblies
(45,
Figure 15-91).
23.
Remove
two
connectors
(43)
and
preformed packings (44) from left valve.
Discard two preformed packings (44).
24.
Remove two hose assemblies (45) from
tees (46 and 47).
25.
Disconnect hose assemblies (55 and 58)
from tees (46 and 47).
26.
Remove tees (46 and 47).
27.
Remove nut (48), washer (49), two clips
(50), spacer (51), clamp (52), washer (53)
and bolt (54, Figure 15-92) from left blade
lift cylinder.
28.
Remove hose assembly (55).
29.
Remove connector (56) and preformed
packing (57) from top of left blade lift
cylinder. Discard preformed packing (57).
30.
Remove hose assembly (58).
31.
Remove connector (59) and preformed
packing (60) from bottom of left blade lift
cylinder. Discard preformed packing (60).
Go to Sheet 6
15-120
Figure 15-90.
Figure 15-91.
Figure 15-92.
