REMOVAL - TM-5-3805-261-20

TM-5-3805-261-20 Grader Heavy Road Motorized (Caterpillar Model 130 G) Manual
Page Navigation
1001

TM 5-3805-261-20 HYDRAULIC SYSTEM MAINTENANCE. 15-24. Blade Lift Lines, Fittings and Hoses. (Sheet 2 of 10) REMOVAL NOTE All hose and tube assemblies must be tagged before disconnecting to aid in installation. Cap all hose and tube ends to prevent contamination. 1. Disconnect two hose assemblies. Refer to paragraph 15-33, steps 1 and 2. 2. Disconnect two hose assemblies (8, Figure 15-79) from right control valve group. 3. Remove two connectors (1) and preformed packings (2, Figure 15-80). Discard two preformed packings (2). 4. Remove two bolts (3), washers (4), clamp (5), two spacers (6) and clamp (7, Figure 15-81). Figure 15-80. Figure 15-79. Figure 15-81. Go to Sheet 3 15-117

Privacy Statement
Press Release
Contact