TM 5-3805-261-20
HYDRAULIC SYSTEM MAINTENANCE.
15-24.
Blade Lift Lines, Fittings and Hoses. (Sheet 6 of 10)
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
1.
Install new preformed packing (60) and
connector (59, Figure 15-92).
2.
Install hose assembly (58) on bottom of left
blade lift cylinder.
3.
Install new preformed packing (57) and
connector (56).
4.
Install hose assembly (55) on top of left
blade lift cylinder.
5.
Install bolt (54), washer (53), clamp (52),
spacer (51), two clips (50), washer (49) and
nut (48) on left blade lift cylinder.
6.
Install tees (47 and 46, Figure 15-91).
7.
Connect hose assemblies (58 and 55) to
tees (47 and 46).
8.
Install two hose assemblies (45) on tees (47
and 46).
9.
Install two new preformed packings (44)
and connectors (43).
10.
Connect two hose assemblies (45) to left
valve.
Go to Sheet 7
15-121
