TM 5-3805-261-20
HYDRAULIC SYSTEM MAINTENANCE. (cont)
15-24.
Blade Lift Lines, Fittings and Hoses. (Sheet 3 of 10)
REMOVAL (cont)
5.
Remove two hose assemblies (8, Figure
15-82) from right blade lift check and relief
valve. Refer to paragraph 15-16, steps 6
thru 9.
6.
Remove items 9 thru 12 (Figure 15-83)
from right blade lift check and relief valve.
Refer to paragraph 15-16, steps 6 - 9.
7.
Disconnect
two
hose
assemblies
(15,
Figure 15-84).
8.
Remove
two
connectors
(13)
and
preformed packings (14) from right valve.
Discard two preformed packings (14).
9.
Remove two hose assemblies (15) from
tees (16 and 17).
10.
Disconnect hose assemblies (25 and 28)
from tees (16 and 17).
11.
Remove tees (16 and 17).
12.
Remove nut (18), washer (19), two clips
(20), spacer (21), clamp (22), washer (23)
and bolt (24, Figure 15-85) from right blade
lift cylinder.
13.
Remove hose assembly (25).
14.
Remove connector (26) and preformed
packing (27) from top of right blade lift
cylinder. Discard preformed packing (27).
15.
Remove hose assembly (28).
16.
Remove connector (29) and preformed
packing (30) from bottom of right blade lift
cylinder. Discard preformed packing (30).
Go to Sheet 4
15-118
Figure 15-82.
Figure 15-83.
Figure 15-84.
Figure 15-85.
