TM 5-3805-261-20
HYDRAULIC SYSTEM MAINTENANCE.
15-23.
Blade Float Lines, Fittings and Hoses. (Sheet 3 of 5)
REMOVAL
6.
Disconnect hose assemblies (11 and 22,
Figure 15-76).
7.
Remove tee (12), connector (13) and
preformed packing (14). Discard preformed
packing (14).
8.
Remove two bolts (15), washers (16),
clamps (17) and spacers (18, Figure 15-
77).
9.
Remove hose assembly (19), elbow (20)
and preformed packing (21). Discard
preformed packing (21).
10.
Remove hose assembly (22), elbow (23)
and preformed packing (24). Discard
preformed packing (24).
11.
Remove two bolts (25), washers (26),
clamps (27) and spacers (28, Figure 15-
78).
12.
Remove bolt (29) and clip (30).
13.
Remove hose assembly (31), elbow (32)
and preformed packing (33). Discard
preformed packing (33).
14.
Remove hose assembly (34), elbow (35)
and preformed packing (36). Discard
preformed packing (36).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
Figure 15-76.
Figure 15-77.
Figure 15-78.
Go to Sheet 4
15-113
