TM 5-3805-261-20
HYDRAULIC SYSTEM MAINTENANCE. (cont)
15-23.
Blade Float Lines, Fittings and Hoses. (Sheet 2 of 5)
REMOVAL
NOTE
All hose and tube assemblies must
be tagged before disconnecting to
aid in installation. Cap all hose and
tube ends and plug all open hydraulic
ports to prevent contamination.
1.
Remove hose assemblies (1 and 2, Figure
15-74) from under side of cab.
2.
Remove elbow (3) and preformed packing
(4). Discard preformed packing (4).
3.
Remove elbow (5) and preformed packing
(6). Discard preformed packing (6).
4.
Disconnect hose assemblies (7 and 34,
Figure 15-75).
5.
Remove
tee
(8),
connector
(9)
and
preformed packing (10). Discard preformed
packing (10).
Figure 15-74.
Figure 15-75.
Go to Sheet 3
15-112