TM 5-3805-293-23-4
0246
DISASSEMBLY CONTINUED
10. Remove three fittings (Figure 9, Item 1) and O-rings (Figure 9, Item 2) from end cap (Figure 9, Item 3). Discard
O-rings.
11. Remove fitting (Figure 9, Item 5) and O-ring (Figure 9, Item 4) from end cap (Figure 9, Item 3). Discard O-ring.
12. Remove two fittings (Figure 9, Item 6) and O-rings (Figure 9, Item 7) from end cap (Figure 9, Item 3). Discard
O-rings.
13. Remove two fittings (Figure 9, Item 8) and O-rings (Figure 9, Item 9) from end cap (Figure 9, Item 3). Discard
O-rings.
Figure 9. End Cap Fittings.
0246
END OF TASK
CLEANING AND INSPECTION
000246
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK
ASSEMBLY
000246
1. Install two new O-rings (Figure 9, Item 9) and fittings (Figure 9, Item 8) on end cap (Figure 9, Item 3).
2. Install two new O-rings (Figure 9, Item 7) and fittings (Figure 9, Item 6) on end cap (Figure 9, Item 3).
3. Install new O-ring (Figure 9, Item 4) and fitting (Figure 9, Item 5) on end cap (Figure 9, Item 3).
4. Install three new O-rings (Figure 9, Item 2) and fittings (Figure 9, Item 1) on end cap (Figure 9, Item 3).