TM 5-3805-293-23-2
0041
BATTERY CHARGING OUT OF MACHINE
00041
1. Check polarity of battery posts. Positive (+) battery post has a larger diameter than negative (-) post.
2. Connect positive (red) clamp of battery charger to positive (+) post of battery.
WARN I N G
Do not face battery when making final connection to battery. Failure to follow this warning
may cause injury or death to personnel.
N OT E
If positive (red) and negative (black) leads are connected in reverse, an audible alarm will
sound and the charger will produce no output current.
3. Connect negative (black) clamp of battery charger to negative (-) post of battery.
4. Connect red and black charger cables to battery charger.
N OT E
Ensure battery charger switch is OFF before connecting the battery charger power cord.
5. Connect the battery charger power cord to battery charger.
6. Turn battery charger switch ON.
7. Charge battery until the green Charge Complete LED is illuminated.
8. Battery charger will terminate when charge current drops below one ampere or less.
9. When charge is complete, turn battery charger switch OFF.
10. Wait approximately 10 minutes, then disconnect negative (black) clamp of battery charger from negative post
of battery.
11. Remove positive (red) clamp of battery charger from positive post of battery.
END OF TASK
0041-2