TM 5-3805-293-23-2
0031
Table 1. Implement Code (2200-00 TO 2954-14) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2210-03 Auxiliary Lever #7
4. Using digital multimeter, test for
Resistance 5.0 Ohms or Less -
Position Sensor Voltage
continuity between harness con-
Proceed to step 5.
Above Normal - Continued
nector P-C33 (WP 0009, Figure
Resistance More Than 5.0 Ohms -
209) terminal 2 and harness con-
Replace cab lower wiring harness
nector P-C41 (WP 0009, Figure
(WP 0266).
69) terminal 23.
Connect cab lower harness connector
Resistance should be less than
P-C33 (WP 0009, Figure 209) to
5.0 Ohms.
scarifier lever (WP 0009, Figure 210)
(WP 0275).
Proceed to step 10.
5. Using digital multimeter, test for
Resistance 5.0 Ohms or less -
continuity between harness con-
Proceed to step 6.
nector P-C33 (WP 0009, Figure
Resistance More Than 5.0 Ohms -
209) terminal 2 and harness con-
Replace cab lower wiring harness
nector P-C41 (WP 0009, Figure
(WP 0266).
69) terminal 27.
Connect cab lower harness connector
Resistance should be less than
P-C33 (WP 0009, Figure 209) to
5.0 Ohms.
scarifier lever (WP 0009, Figure 210)
(WP 0275).
Proceed to step 10.
6. Using digital multimeter, test for
Resistance 5.0 Ohms or Less -
continuity between harness con-
Proceed to step 7.
nector P-C33 (WP 0009, Figure
Resistance More Than 5.0 Ohms -
209) terminal 2 and harness con-
Replace cab lower wiring harness
nector P-C41 (WP 0009, Figure
(WP 0266).
69) terminal 32.
Connect cab lower harness connector
Resistance should be less than
P-C33 (WP 0009, Figure 209) to
5.0 Ohms.
scarifier lever (WP 0009, Figure 210)
(WP 0275).
Proceed to step 10.
7. Using digital multimeter, test for
Resistance 5.0 Ohms or Less -
continuity between harness con-
Proceed to step 8.
nector P-C33 (WP 0009, Figure
Resistance More Than 5.0 Ohms -
209) terminal 2 and harness con-
Replace cab lower wiring harness
nector P-C41 (WP 0009, Figure
(WP 0266).
69) terminal 56.
Connect cab lower harness connector
Resistance should be less than
P-C33 (WP 0009, Figure 209) to
5.0 Ohms.
scarifier lever (WP 0009, Figure 210)
(WP 0275).
Proceed to step 10.
0031-100
