TM 5-3805-293-23-2
0031
Table 1. Implement Code (2200-00 TO 2954-14) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2202-14 Steering Valve Con-
15. Using digital multimeter, test for
Continuity - Replace cab lower wiring
trol Module Bad Device or
continuity between harness con-
harness (WP 0266).
Component - Continued
nector P-C39 (WP 0009, Figure
Connect harness connector U-C11
70) terminal 4 and all other termi-
(WP 0009, Figure 256) to steering
nals on harness connector P-C39
valve pull up resistor (WP 0009,
and to machine ground.
Figure 257).
There should be no continuity.
Connect harness connector U-C34
(WP 0009, Figure 217) to steering
valve control module (WP 0242), and
install rear front frame cover (WP
0224).
Proceed to step 17.
No Continuity - Proceed to step 16.
0031-87