TM 5-3805-293-23-1
0017
Table 1. Transmission Code (0573-03 to 0967-09) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0681-05 Parking Brake Sole-
5. Using digital multimeter, test for
Resistance 5.0 Ohms or Less - Pro-
noid Current Below Normal -
continuity between harness con-
ceed to step 6.
Continued
nector FA-C21 (WP 0009, Figure
Resistance More Than 5.0 Ohms -
124) terminal 4 and terminal 6.
Replace rear chassis wiring harness
Resistance should be less than
(WP 0188).
5.0 ohms.
Connect harness connector T-C11
(WP 0009, Figure 139) to parking
brake solenoid (WP 0009, Figure 140)
(WP 0156).
Proceed to step 8.
6. Install a jumper wire between har-
ness connector T-C11 (WP 0009,
Figure 139) terminal 1 and termi-
nal 2.
7. Using digital multimeter, test for
Resistance 5.0 Ohms or Less -
continuity between harness con-
Replace parking brake solenoid (WP
nector T-C1 (WP 0009, Figure
0156).
130) terminal 5 and terminal 6.
Connect rear chassis harness con-
Resistance should be less than
nector FA-C28 (WP 0009, Figure 129)
5.0 ohms.
to transmission wiring harness con-
nector T-C1 (WP 0009, Figure 130).
Connect harness connector FA-C21
(WP 0009, Figure 124) to transmis-
sion ECM J2 (WP 0009, Figure 112)
(WP 0137).
Proceed to step 8.
Resistance More Than 5.0 Ohms -
Replace rear chassis wiring harness
(WP 0188).
Connect harness connector T-C11
(WP 0009, Figure 139) to parking
brake solenoid (WP 0009, Figure 140)
(WP 0156).
Proceed to step 8.
8. Using MSD (WP 0006), verify
0681-05 Code Remains Active -
0681-05 is not active.
Repeat troubleshooting from the
beginning of this diagnostic code.
0681-05 Code Not Active - Trouble-
shooting complete.
0017-118