TM 5-3805-293-23-1
0017
Table 1. Transmission Code (0573-03 to 0967-09) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0681-03 Parking Brake Sole-
2. Disconnect harness connector
noid Voltage Above Normal -
FA-C21 (WP 0009, Figure 124)
Continued
from transmission ECM J2 (WP
0009, Figure 112) (WP 0137).
3. Disconnect rear chassis harness
connector FA-C28 (WP 0009, Fig-
ure 129) from transmission wiring
harness connector T-C1 (WP
0009, Figure 130).
4. Using digital multimeter, test for
Continuity - Replace rear chassis
continuity between harness con-
wiring harness (WP 0188).
nector FA-C21 (WP 0009, Figure
Proceed to step 7.
124) terminal 6 and all other ter-
No Continuity - Proceed to step 5.
minals on harness connector FA-
C21.
There should be no continuity.
5. Disconnect harness connector T-
C11 (WP 0009, Figure 139) from
parking brake solenoid (WP 0009,
Figure 140) (WP 0156).
6. Using digital multimeter, test for
Continuity - Replace transmission
continuity between harness con-
wiring harness (WP 0158).
nector T-C11 (WP 0009, Figure
Connect harness connector FA-C21
139) terminal 5 and all other ter-
(WP 0009, Figure 124) from transmis-
minals on harness connector FA-
sion ECM J2 (WP 0009, Figure 112)
C21.
(WP 0137).
There should be no continuity.
Proceed to step 7.
No Continuity - Replace transmis-
sion ECM (WP 0137).
Connect rear chassis harness con-
nector FA-C28 (WP 0009, Figure 129)
to transmission wiring harness con-
nector T-C1 (WP 0009, Figure 130).
Proceed to step 7.
7. Using MSD (WP 0006), verify
0681-03 Code Remains Active -
0681-03 is not active.
Repeat troubleshooting from the
beginning of this diagnostic code.
0681-03 Code Not Active - Trouble-
shooting complete.
0017-115