TM 5-3805-293-23-1
0017
Table 1. Transmission Code (0573-03 to 0967-09) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0681-06 Parking Brake Sole-
2. Using MSD (WP 0006), verify
0681-06 Code Becomes Active -
noid Current Above Normal -
0681-06 is active.
Replace transmission wiring harness
Continued
(WP 0158).
Proceed to step 3.
0681-06 Code Remains Active - Pro-
ceed to Test Step 4.
3. Using MSD (WP 0006), verify
0681-06 Code Remains Active -
0681-06 is not active.
Repeat troubleshooting from the
beginning of this diagnostic code.
0681-06 Code Not Active - Trouble-
shooting complete.
Test Step 4. Test Rear Chassis Wir-
ing Harness.
1. Turn ignition switch and battery
disconnect switch to the OFF
position (TM 5-3805-293-10).
2. Disconnect harness connector
FA-C21 (WP 0009, Figure 124)
from transmission ECM J2 (WP
0009, Figure 112) (WP 0137).
3. Using digital multimeter, test for
Continuity - Replace rear chassis
continuity between harness con-
wiring harness (WP 0188).
nector FA-C21 (WP 0009, Figure
Connect harness connector T-C11
124) terminal 6 and all other ter-
(WP 0009, Figure 139) to parking
minals on harness connector FA-
brake solenoid (WP 0009, Figure 140)
C21 and to machine ground.
(WP 0156).
There should be no continuity.
Proceed to step 4.
No Continuity - Replace transmis-
sion ECM (WP 0137).
Connect harness connector FA-C21
(WP 0009, Figure 124) to transmis-
sion ECM J2 (WP 0009, Figure 112)
(WP 0137).
Connect harness connector T-C11
(WP 0009, Figure 139) to parking
brake solenoid (WP 0009, Figure 140)
(WP 0156).
Proceed to step 4.
4. Using MSD (WP 0006), verify
0681-06 Code Remains Active -
0681-06 is not active.
Repeat troubleshooting from the
beginning of this diagnostic code.
0681-06 Code Not Active - Trouble-
shooting complete.
0017-120