TM 5-3805-293-23-1
0017
Table 1. Transmission Code (0573-03 to 0967-09) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0675-02 Transmission Inter-
6. Disconnect harness connector
mediate Speed Sensor #2
Data Erratic, Intermittent or
from transmission ECM J1 (WP
Incorrect - Continued
Resistance 5.0 Ohms or Less -
continuity between harness con-
Replace transmission ECM (WP
0137).
113) terminal 4 and terminal 5.
Connect transmission sensor wiring
5.0 ohms.
Figure 159) to transmission input
160) (WP 0150).
Proceed to step 12.
Proceed to step 8.
8. Remove jumper wire from har-
Figure 159) terminal 1 and termi-
nal 2.
9. Disconnect sensor wiring har-
Figure 148) from rear chassis wir-
Figure 147).
continuity between harness con-
wiring harness (WP 0188).
Connect transmission sensor wiring
113) terminal 6 and all other termi-
nals on harness connector FA-
Figure 159) to transmission input
C20 and to machine ground.
There should be no continuity.
160) (WP 0150).
Proceed to step 12.
0017-113