TM 5-3805-293-23-1
0017
Table 1. Transmission Code (0573-03 to 0967-09) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0615-08 Machine Articula-
9. Using MSD (WP 0006), verify
0615-08 Was Active for the Trans-
tion Angle Sensor Abnor-
0615-08 was active for the Trans-
mission ECM Only - Replace trans-
mal Frequency, Pulse Width
mission ECM or the Implement 1
mission ECM (WP 0137).
or Period - Continued
ECM.
Connect secondary steering harness
connector AT-C3 (WP 0009, Figure
144) to articulation angle position sen-
sor 1 (left) (WP 0009, Figure 145)
(WP 0257).
Proceed to step 10.
0615-08 Was Active for the Imple-
ment 1 ECM Only - Replace imple-
ment 1 ECM (WP 0268).
Connect secondary steering harness
connector AT-C3 (WP 0009, Figure
144) to left articulation angle position
sensor (WP 0009, Figure 145) (WP
0257).
Proceed to step 10.
0615-08 Was Active for the Trans-
mission ECM and the Implement 1
ECM - Replace transmission ECM
(WP 0137) and implement 1 ECM
(WP 0268).
Connect secondary steering harness
connector AT-C3 (WP 0009, Figure
144) to left articulation angle position
sensor (WP 0009, Figure 145) (WP
0257).
Proceed to step 10.
10. Connect MSD (WP 0006). Select
0615-08 Code Active - Repeat trou-
Trans/Chassis 120M and verify
bleshooting from the beginning of this
0615-08 is active.
diagnostic code.
0615-08 Code Not Active - Trouble-
shooting complete.
0017-59