TM 5-3805-293-23-1
0017
Table 1. Transmission Code (0573-03 to 0967-09) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0615-13 Machine Articula-
2. Using MSD (WP 0006), verify
0615-13 Code Active - Proceed to
tion Angle Sensor Out Of
0615-13 is active for the transmis-
Test Step 3.
Calibration - Continued
sion ECM or the Implement 1
0615-13 Code Not Active - Trouble-
ECM.
shooting complete.
Test Step 3. Check Sensor.
1. Verify articulation angle position
Articulation Angle Position Sensor
sensor 1 (left) is within specifica-
OK - Proceed to Test Step 4.
tions refer to Adjustment in WP
Articulation Angle Position Sensor
0257.
Needs Adjustment - Adjust sensor
as directed (WP 0257).
Proceed to step 2.
2. Connect MSD (WP 0006). Select
0615-13 Code Active - Repeat trou-
Trans/Chassis 120M and verify
bleshooting from the beginning of this
0615-13 is active.
diagnostic code.
0615-13 Code Not Active - Trouble-
shooting complete.
Test Step 4. Calibrate Sensor.
1. Calibrate articulation angle posi-
Articulation Angle Position Sensor
tion sensor. Refer to Calibration in
Cannot Be Calibrated - Perform cali-
WP 0257.
bration procedure again. If sensor
cannot be calibrated, replace articula-
tion angle position sensor (WP 0257).
Proceed to step 2.
Articulation Angle Position Sensor
Calibrated OK - Proceed to step 2.
2. Connect MSD (WP 0006). Select
0615-13 Code Active - Repeat trou-
Trans/Chassis 120M and verify
bleshooting from the beginning of this
0615-13 is active.
diagnostic code.
0615-13 Code Not Active - Trouble-
shooting complete.
0017-61