TM 5-3805-293-23-1
0017
Table 1. Transmission Code (0573-03 to 0967-09) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0573-08 Inching Pedal Posi-
6. Using MSD (WP 0006), select
0573-03 Code Active - Proceed to
tion Sensor Abnormal Fre-
Trans/Chassis 120M and verify
step 7.
quency, Pulse Width, or
0573-03 is active.
0573-03 Code Not Active - Replace
Period - Continued
transmission ECM (WP 0137).
Connect harness connector P-C40
(WP 0009, Figure 114) to inching
pedal position sensor (WP 0009, Fig-
ure 115) (WP 0289).
Proceed to step 9.
7. Remove jumper wire from B&C
(installed step #4).
8. Connect a jumper wire between
0573-04 Code Active - Replace inch-
harness connector P-C40 (WP
ing pedal position sensor (WP 0289).
0009, Figure 114) terminal A and
Proceed to step 9.
terminal C.
0573-04 Code Not Active - Replace
transmission ECM (WP 0137).
Connect harness connector P-C40
(WP 0009, Figure 114) to inching
pedal position sensor (WP 0009, Fig-
ure 115) (WP 0289).
Proceed to step 9.
9. Using MSD (WP 0006), verify
0573-08 Code Remains Active -
0573-08 is not active.
Repeat troubleshooting from the
beginning of this diagnostic code.
0573-08 Code Not Active - Trouble-
shooting complete.
0017-8
