TM 5-3805-293-23-1
0017
Table 1. Transmission Code (0573-03 to 0967-09) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0585-02 Transmission Out-
7. Using digital multimeter, test for
Resistance 5.0 Ohms or Less -
put Speed Sensor #1 Data
continuity between harness con-
Replace transmission ECM (WP
Erratic, Intermittent or Incor-
nector FA-C20 (WP 0009, Figure
0137).
rect - Continued
113) terminal 17 and terminal 18.
Connect transmission sensor wiring
Resistance should be less than
harness connector V-C8 (WP 0009,
5.0 ohms.
Figure 149) to transmission output
speed sensor 1 (WP 0009, Figure
150) (WP 0148).
Remove jumper wire from harness
connector V-C8 (WP 0009, Figure
149) terminal 1 and terminal 2.
Proceed to step 12.
Resistance More Than 5.0 Ohms -
Proceed to step 8.
8. Remove jumper wire from har-
ness connector V-C8 (WP 0009,
Figure 149) terminal 1 and termi-
nal 2.
9. Disconnect sensor wiring har-
ness connector V-C5 (WP 0009,
Figure 148) from rear chassis wir-
ing harness FA-C19 (WP 0009,
Figure 147).
10. Using digital multimeter, test for
Continuity - Replace rear chassis
continuity between harness con-
wiring harness (WP 0188).
nector FA-C20 (WP 0009, Figure
Proceed to step 12.
113) terminal 17 and all other ter-
No Continuity - Proceed to step 11.
minals on harness connector FA-
C20 and to machine ground.
There should be no continuity.
11. Using digital multimeter, test for
Continuity - Replace rear chassis
continuity between harness con-
wiring harness (WP 0188).
nector FA-C20 (WP 0009, Figure
Connect transmission sensor wiring
113) terminal 18 and all other ter-
harness connector V-C8 (WP 0009,
minals on harness connector FA-
Figure 149) to transmission output
C20 and to machine ground.
speed sensor 1 (WP 0009, Figure
There should be no continuity.
150) (WP 0148).
Proceed to step 12.
No Continuity - Replace sensor wir-
ing harness (WP 0157).
Connect harness connector FA-C20
(WP 0009, Figure 113) to transmis-
sion ECM J1 (WP 0009, Figure 112).
Proceed to step 12.
0017-10
