TM 5-3805-293-23-1
0014
Table 1. All-Wheel Drive (AWD) Code Troubleshooting - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2298-03 Right Front Drive
4.
Turn battery disconnect switch
Pump Reverse Control Sole-
and ignition switch to the ON posi-
noid Voltage Above Normal -
tion.
Continued
5.
Check for Active code 2298-03 or
Code 2298-03 Remains Active - Pro-
2298-05 in All Wheel Drive 120M
ceed to Test Step 2.
ECM (WP 0006).
Code 2298-03 Becomes Inactive
2298-05 Becomes Active - Replace
pump drive solenoid harness (WP
0201).
Proceed to step 6.
6. Using the MSD (WP 0006), select
2298-03 Code Active - Repeat trou-
All Wheel Drive 120M and verify
bleshooting code from the beginning.
2298-03 is not active.
2298-03 Code Not Active - Trouble-
shooting complete.
Test Step 2. Test for Shorted Filter
Bypass, Pump Drive Solenoid Har-
ness.
1. Turn ignition switch and battery
disconnect switch to the OFF
position.
2. Remove front engine enclosure
access panel (WP 0226).
3. Disconnect filter bypass, pump
drive solenoid AC-C5 harness
connector (WP 0009, Figure 78)
from rear chassis wiring FA-C37
harness connector (WP 0009,
Figure 79) (WP 0199).
4. Turn battery disconnect switch
and ignition switch to the ON posi-
tion.
Code 2298-03 Remains Active - Pro-
5. Check for Active code 2298-03 or
ceed to Test Step 3.
2298-05 in All Wheel Drive 120M
ECM (WP 0006).
Code 2298-03 Becomes Inactive
and 2298-05 Becomes Active -
Replace filter bypass, pump drive
solenoid wiring harness (WP 0199).
Install front engine enclosure access
panel (WP 0226).
Proceed to step 6.
6. Using the MSD (WP 0006), select
2298-03 Code Active - Repeat trou-
All Wheel Drive 120M and verify
bleshooting code from the beginning.
2298-03 is not active.
2298-03 Code Not Active - Trouble-
shooting complete.
0014-95
