TM 5-3805-293-23-1
0014
Table 1. All-Wheel Drive (AWD) Code Troubleshooting - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2297-06 Right Front Drive
3.
Using a digital multimeter, test for
No Continuity - Proceed to step 4.
Pump Forward Control Sole-
continuity between P-C35 termi-
Continuity - Replace cab lower wiring
noid Current Above Normal -
nal 51 (WP 0009, Figure 53) and
harness (WP 0266).
Continued
all circuits in P-C41 (WP 0009,
Connect AC-C5 (WP 0009, Figure 78)
Figure 68). There should be no
on FA-C37 (WP 0009, Figure 79) (WP
continuity.
0199).
Connect AX-C1 (WP 0009, Figure
100) on AC-C1 (WP 0009, Figure
101).
Connect AX-C5 (WP 0009, Figure
106) on right drive pump forward sole-
noid connector (WP 0009, Figure 107)
and close access door.
Install front engine enclosure access
panel (WP 0226).
Proceed to step 4.
4. Using a digital multimeter, test for
No Continuity - Proceed to Test Step
continuity between P-C35 termi-
7.
nal 51 (WP 0009, Figure 53) and
Continuity - Replace cab lower wiring
all circuits in P-C39 (WP 0009,
harness (WP 0266).
Figure 70). There should be no
Connect AC-C5 (WP 0009, Figure 78)
continuity.
on FA-C37 (WP 0009, Figure 79) (WP
0199).
Connect AX-C1 (WP 0009, Figure
100) on AC-C1 (WP 0009, Figure
101).
Connect AX-C5 (WP 0009, Figure
106) on right drive pump forward sole-
noid connector (WP 0009, Figure 107)
and close access door.
Install front engine enclosure access
panel (WP 0226).
Proceed to step 5.
5. Using the MSD (WP 0006), select
2297-06 Code Active - Repeat trou-
All Wheel Drive 120M and verify
bleshooting code from the beginning.
2297-06 is not active.
2297-06 Code Not Active - Trouble-
shooting complete.
0014-90
