ENGINE
ENGINE
DISASSEMBLY AND ASSEMBLY
TM 5-3805-263-14&P-2
9.
10.
11.
12.
13.
14.
15.
16.
17. Remove three wires (22) from the switch.
18. Disconnect the air compressor hose line (25)
from fitting.
19.
20.
21.
Loosen both hose clamps (13) on tube assembly
and remove hose (15) from water pump.
Remove bolts and clips (14) from engine.
Loosen both hose clamps (20) on the tube as-
sembly and remove hose (16) from tube assem-
bly.
Remove bolt (18) and clip from bottom of fuel
tank.
Remove bolt and clamp (19). Remove tube
assembly ( 17).
Put identification on the two transmission oil
lines and remove lines (23) from the transmis-
sion oil cooler.
Remove bolt and clip (24) from the flywheel
housing.
Disconnect the oil pressure gauge line (21)
from the cylinder block fitting.
Turn the fuel supply valve at location (28) to
the OFF position.
Remove two fuel lines (29) from the fuel injec-
tion pump. Remove line (26) from the fuel
filter.
Remove bolt and clip (27) from the oil filler
tube.
1-183