ENGINE
DISASSEMBLY AND ASSEMBLY
19.
20.
21.
22.
ENGINE
Put governor control housing (27) in position
on plate and install bolts to hold it in place.
Fasten a hoist to the plate assembly (26). Put in
position and install bolts on each side of the
plate assembly.
Install clip and bolt (28) in
assembly.
position on the plate
Install the bolt (30) that holds support (22) and
clip to the plate assembly.
23. Put the gauge panel (29) in position on plate
assembly and install the bolts that hold it. Fill
the cooling system with coolant. Turn the fuel
supply to the “ON” position.
end by:
a) install hood
b) install pump group drive shaft
TM 5-3805-263-14&P-2
1-187
