ENGINE
DISASSEMBLY AND ASSEMBLY
TM 5-3805-263-14&P-2
CRANKSHAFT HUB
REMOVE CRANKSHAFT HUB
Tools Needed
A
FT530-2
Puller Tool
1
5H9976
Screw
1
T774
S p a c e r
1
S1591
Bolt 3/8”-16 NC
4
485271
Washer
4
1. Loosen but do not remove bolt (1). Install tool
(A) until the hub is loosened from the crank-
shaft. Remove tool (A).
2. Remove bolt (1) and washer (2) from crank-
shaft. Remove hub (3).
INSTALL CRANKSHAFT HUB
1. Put hub (1) in position on crankshaft.
2. Install washer (2) and bolt (3) on crankshaft
and tighten bolt to a torque of 230 ± 20 lb.ft.
(312 ± 27 N•m)
1-180
