TM 5-3805-263-14&P-3
DISASSEMBLY AND ASSEMBLY
PARKING BRAKE CONTROL VALVE
INSTALL PARKING BRAKE CONTROL
VALVE
1
Put parking brake control valve (1) in position on
console Install nut (2) and boot (3).
2
Connect air lines (4) to their correct location on
valve. Connect two wires (5).
3
Install plate (7) and spring (6) in position in
console.
4
Make an adjustment to the valve location on
console to get a .03 in. (0.8 mm) clearance
between the valve and plate with the brake lever in
the "PARK" position.
5
Put cover (8) in position on console. Install the
bolts that hold it.
6
Put linkage (10) in position on the handle. Install
the pin (9) that holds it. Install the cotter pin.
4-72
