TM 5-3805-263-14&P-3
OPERATOR'S STATION
REMOVE PARKING BRAKE CONTROL
VALVE
1
Release all air pressure in the air tanks.
Do not disconnect any air lines from
the parking brake control valve until
the air pressure is zero.
2
Remove the cotter pin and pin (2) from linkage (4).
Move the linkage free of the handle. Remove bolts
(3) and cover (1).
3
Remove bolts from plate (6). Remove spring (5).
4
Put identification on air lines (7) and disconnect
from valve. Disconnect two wires (8) from switch.
5
Remove boot (10) and nut (9) from valve.
6
Remove parking brake control valve (11).
4-71
