TM 5-3805-263-14&P-3
DISASSEMBLY AND ASSEMBLY
CIRCLE DRIVE MOTOR
REMOVE AND INSTALL CIRCLE
DRIVE MOTOR
Tools Needed
A
B
1P1857
Pliers
1
1P510
Driver Group
1
1.
Drain the oil from the circle drive.
2.
Put identification on oil lines (I) and (2) as to their
location on the circle drive motor. Disconnect oil
lines.
3.
Remove bolts (3) that hold the circle drive motor to
the circle drive. Remove circle drive motor (4).
4.
Inspect the O-ring seal on the circle drive motor and
make a replacement if damaged.
5.
Put the circle drive motor (4) in position and install
four bolts.
6.
Install two oil lines (1) and (2).
7.
Fill the circle drive to the correct level.
DISASSEMBLE CIRCLE DRIVE MOTOR
Tools Needed
A
B
1P 1857
Pliers
1
1P510
Driver Group
1
start by:
a) remove circle drive motor
1. Remove seven bolts (1) and cover (2) from
housing. Remove O-ring seal from cover.
2. Remove inner plate (4) and outer plate (3) from
assembly.
3. Remove seal (5) from inner plate.
3-216
