TM 5-3805-263-14&P-3
VEHICLE SYSTEMS
CIRCLE DRIVE MOTOR
13. Install plate (18) on rotor assembly.
14. Install manifold (19) on plate.
15. Inspect seal (20) for wear or damage and install on
inner plate (21).
16. Install inner plate assembly (23) and outer plate
(22) in position on assembly.
17. Install sleeve (26) in position on housing.
18. Install O-ring seal on cover (25). Put cover in
position on sleeve and install seven bolts (24).
Tighten bolts to a torque of 50 5 lb. ft. (70 7
Nm).
end by:
a) install circle drive motor
3-221
