TM 5-3805-263-14&P-3
DISASSEMBLY AND ASSEMILY
CIRCLE DRIVE MOTOR
6.
Install snap ring (9) in position in housing with tool
(B).
7.
Install seal with tooling (A).
8. Inspect O-ring seal (II) and make a replacement if
necessary. Install seal.
9.
Install shaft (10) in housing assembly.
10. Install link (12) and bearing (13).
11. Install plate (14) in position on bearing (13).
12. Install the inner rotor ( 1 7) on link. Install outer rotor
(15) and seven pins (16).
3-220
