TM 5-3805-263-14&P-3
VEHICLE SYSTEMS
CIRCLE DRIVE MOTOR
14. Remove bearings (23), (24) and races (25) from
housing with tooling (B). Remove seal ring from
housing.
ASSEMBLE CIRCLE DRIVE MOTOR
Tools Needed
A
B
1P510
Driver Group
1
1P1857
Pliers
1
1.
Install bearing (1) and two races (5) in position in
the housing.
2.
Install bearing (2) in housing with tooling (A). The
bearing depth from surface "X" must be 2.410 in.
(61.214 mm).
3.
Install bearing (3) to a depth of .100 in. (2.54 mm)
from surface "X".
4.
Inspect and make a replacement of seal (4) if
damaged.
5.
Install seal (6), washer (7) and spacer (8) in
position in housing.
3-219
