TM 53805263-14&P-3
DISASSEMBLY AND ASSEMBLY
BLADE LIFT ARMS
6.
Fasten a hoist to blade lift arm (1). Put it in position
on the frame. Put the washers in position between
the lift arm and the frame. Install the pin that holds
the lift arm and the frame. Install the pin that holds
the lift arm to the frame. Make sure the groove in
the pin is in alignment with the opening in the lift
arm. Put the lock in position in the lift arm. Install
the bolts that hold it.
7.
Put lift arm (1) in position in blade lift bar (12). Install
the washers between the lift bar and the lift arm.
Install pin (14). Make sure the groove in the pin is in
alignment with the opening in the lift arm. Put lock
(15) in position in the lift arm. Install bolts (13) that
hold it.
8.
Put plate ( 0) in its correct position on the pin. Install
bolt ( 1) that holds it. Tighten bolt (1) to a torque of
95 + 5 lb ft. (130 + 7 N-m).
end by:
a) install blade lift cylinders
TYPICAL EXAMPLE
3-192
