TM 5-3805-261-34
TRANSMISSION MAINTENANCE.
14-2.
Transmission Assembly. (Sheet 17 of 20)
ASSEMBLY
NOTE
Steps 54 thru 57 cover assem-
bly of one of two items 13
thru 9 and 16 as an assembly.
Assembly of remaining items
13 thru 9 and 16 as an
assembly is identical.
54.
Install new seal ring (13),
carrier ring (12) and retaining
ring (11) in bearing cage (16,
Figure 14-28).
55.
Using dry ice or freezer, lower
temperature of bearing cup (10)
and install cup (10) in bearing
cage (16).
56.
Install two new preformed
packings (9).
57.
Repeat steps 54 thru 57 for
remaining items 13 thru 9 and 16
as an assembly (Figure 14-29).
NOTE
Install shim packs in same
locations from which they
were removed.
58.
Install two shim packs (17).
59.
Install two items 13 thru 9 and
16 as an assembly.
60.
Install five lockwashers (8) and
bolts (7).
61.
Install new preformed packing
(6), retainer (5) and bolt (4).
Tighten bolt (4) to 85 ft-lb
torque.
Go to Sheet 18
Figure 14-28.
Figure 14-29.
14-19
