TM 5-3805-261-34
TRANSMISSION MAINTENANCE.
14-2.
Transmission Assembly. (Sheet 1 of 20)
This task covers:
a.
Removal
b.
Cleaning
c.
Inspection
d.
Installation
INITIAL SETUP:
Applicable Configurations
Materials/Parts
All
Dry cleaning solvent,
Item 15, Appendix C
Tools
Clean cloths, Item 41,
General Mechanic’s Tool Kit:
Appendix C
Automotive (NSN 5180-00-
Small tags, Item 43, Appendix C
177-7033)
Anti-seize compound, Item 8,
Puller assembly 8B7548
Appendix C
Ratchet box wrench 8H684
Engine oil SAE 10, Item 67,
Bearing cup pulling attachment
Appendix C
8B7554
Engine oil SAE 30, Item 69,
Spanner socket wrench 5P2969
Appendix C
Bearing pulling attachment
Preformed packings, Items 6, 10,
8H663
16, 27, 29, 30, 31, 67, 75, 78
Spacer T774
Seal rings, Items 13, 38, 66,
Hoist and sling
79, 80
Wood blocks
Dry ice or freezer
Two 3/8-16NC forcing screws
Three 1/2-13NC forcing screws
Personnel Required
Two 3/8-16NC forged eyebolts
Construction equipment
Two 1/2-13NC forged eyebolts
repairer MOS 62B
3/4-10NC forged eyebolt
5/8-11NC x 6 bolt
References
3/8-16NC x 4 bolt
TM 5-3805-261-10
Bar
TM 5-3805-261-20
Crowfoot bar
Special Environmental Conditions
Test Equipment
None
Dial test indicator 8S2328
General Safety Instructions
None
Torques
Except for special torques shown,
all fasteners are tightened to
standard torques. Refer to
Appendix E.
Go to Sheet 2
14-3
