TM 5-3805-261-34
HYDRAULIC SYSTEM MAINTENANCE.
10-23.
Oil Cooler to Relief Valve and Hydraulic Tank Lines and Fittings.
(Sheet 8 of 9)
INSTALLATION
17. Install clip (41), washer (40)
and bolt (39, Figure 10-171).
18. Install two clips (38), washers
(37) and bolts (36, Figure
10-170).
19. Install new preformed packing
(35) and connector (34, Figure
10-169).
20. Connect hose assembly (59).
21. Install four clips (33), washers
(32) and bolts (31).
22. Install new preformed packing
(30) and connector (29).
23. Connect hose assembly (58).
24. Install new preformed packing
(28), connector (27) and tube
assembly (26, Figure 10-168).
25. Install clip (25), washer (24)
and nut (23).
26. Install hose assembly (22), two
clamps (21) and hose (20).
Figure 10-171.
Figure 10-170.
Figure 10-169.
Figure 10-168.
Go to Sheet 9
10-143