TM 5-3805-261-34
HYDRAULIC SYSTEM MAINTENANCE. (cont)
10-23.
Oil Cooler to Relief Valve and Hydraulic Tank Lines and Fittings.
(Sheet 9 of 9)
INSTALLATION (cont)
27. Install new preformed packing
(19) and connector (18, Figure
10-167).
28. Install new preformed packing
(17) and connector (16).
29. Install new preformed packing
(15) and connector (14).
30. Install new preformed packing
(13) and connector (12).
31. Connect hose assemblies (72, 69,
22 and 11).
32. Install new seal (10), stem (9),
flange (8) and four bolts (7,
Figure 10-166).
33. Install new seal (6), hose (5),
flange (4) and three bolts (3).
34. Install two clamps (2) and hose
(1).
NOTE
Return 130G Grader to
original equipment condition.
Figure 10-167.
Figure 10-166.
End of Task
10-144
