TM 5-3805-261-34
HYDRAULIC SYSTEM MAINTENANCE.
10-23.
Oil Cooler to Relief Valve and Hydraulic Tank Lines and Fittings.
(Sheet 4 of 9)
REMOVAL
9.
Remove hose (20), two clamps (21)
and hose assembly (22).
10. Remove nut (23), washer (24),
clip (25) and move wire and cable
assemblies to one side.
11. Remove tube assembly (26),
connector (27) and preformed
packing (28) from junction block
under right center of cab.
Discard preformed packing (28).
12. Disconnect hose assembly (58,
Figure 10-169).
13. Remove connector (29) and
preformed packing (30). Discard
preformed packing (30).
14. Remove four bolts (31), washers
(32) and clips (33).
15. Disconnect hose assembly (59)
from left side of oil cooler.
16. Remove connector (34) and
preformed packing (35). Discard
preformed packing (35).
17. Remove two bolts (36), washers
(37) and clips (38, Figure 10-170)
from left side frame rails.
18. Remove bolt (39), washer (40) and
clip (41, Figure 10-171) from
right side frame rail.
19. Remove bolt (42), washer (43) and
clip (44, Figure 10-172) from
right side frame rail.
Go
10-139
Figure 10-169
Figure 10-170.
Figure 10-171.
Figure 10-172.
