TM 5-3805-261-34
HYDRAULIC SYSTEM MAINTENANCE. (cont)
10-21.
Hydraulic Tank and Mounting. (Sheet 4 of 7)
DISASSEMBLY (cont)
5.
Remove two lock nuts (30),
spacers (31), retainers (32),
springs (33), seats (34), valves
(35), springs (36) and retainers
(37) from bolts (38, Figure
10-154).
6.
Remove 48 nuts (39), washers
(40), bolts (41) and cover (42,
Figure 10-155). Matchmark cover
(42) as to top or bottom to aid
in installation.
7.
Remove and discard gasket (43).
Remove all gasket material from
mounting surface.
8.
Remove six nuts (44), washers
(45), retainer (46), plate (47),
grommet (48) and glass (49,
Figure 10-156).
9.
Remove two bolts (50), washers
(51), lock (52), tube (53) and
preformed packing (54). Discard
preformed packing (54).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter
2.
Go to Sheet 5
10-124
Figure 10-154.
Figure 10-155.
Figure 10-156.
