TM 5-3805-261-34
HYDRAULIC SYSTEM MAINTENANCE. (cont)
10-21.
Hydraulic Tank and Mounting. (Sheet 2 of 7)
REMOVAL
WARNING
Weight of hydraulic tank is
250 lbs. Use adequate hoist
and sling for lifting.
Failure to follow this
procedure may cause INJURY.
If you are injured, seek
medical aid immediately.
NOTE
All hoses, lines and fittings
must be tagged before discon-
necting to aid in installa-
tion. Cap all hose ends to
prevent contamination.
1.
Attach hoist and sling to
hydraulic tank.
NOTE
Steps 3 thru 6 are the
maintenance procedure for the
left support and hardware.
The maintenance procedure for
the right support and
hardware is identical.
2.
Remove two bolts (1), washers
(2), spacers (3) and blocks (4,
Figure 10-150).
3.
Remove nut (5), washers (6 and
7), mounting (8), washers (9 and
10) and bolt (11).
Go to Sheet 3
10-122
Figure 10-150.
