TM 5-3805-261-34
HYDRAULIC SYSTEM MAINTENANCE. (cont)
10-21.
Hydraulic Tank and Mounting. (Sheet 6 of 7)
INSTALLATION
1.
Attach hoist and sling to
hydraulic tank.
2.
Position hydraulic tank behind
operators compartment.
NOTE
Steps 23 thru 25 are the
maintenance procedure for the
right support and hardware.
The maintenance procedure for
the left support and hardware
is identical.
3.
Install support (19). bolt (18),
washers (17 and 16), mounting
(15), washers (14 and 13) and nut
(12, Figure 10-151). Tighten nut
(12) to 40 ft-lb torque.
4.
Install bolt (11), washers (10
and 9), mounting (8), washers (7
and 6) and nut (5, Figure
10-150). Tighten nut (5) to 40
ft-lb torque.
5.
Install two blocks (4), spacers
(3), washers (2) and bolts (1).
6.
Remove hoist and sling.
Figure 10-151.
Figure 10-150.
Go to Sheet 7
10-126