TM 5-3805-261-34
HYDRAULIC SYSTEM MAINTENANCE.
10-21.
Hydraulic Tank and Mounting. (Sheet 5 of 7)
ASSEMBLY
1.
Install new preformed packing
(54), tube (53), lock (52), two
washers (51) and bolts (50) on
tank (55, Figure 10-156).
2.
Install glass (49). grommet (48),
plate (47), retainer (46), six
washers (45) and nuts (44).
3.
Install new gasket (43, Figure
10-155).
4.
Aline matchmark to install cover
(42), 48 bolts (41), washers (40)
and nuts (39). Tighten 48 nuts
(39) to 28 ft-lb torque.
5.
Install two retainers (37),
springs (36), valves (35), seats
(34), springs (33), retainers
(32), spacers (31) and lock nuts
(30) on bolts (38, Figure
10-154).
6.
Install items 38 thru 30 as an
assembly (Figure 10-153).
7.
Install plugs (29 and 28, Figure
10-152).
8.
Install brackets (27 and 26),
four washers (25) and bolts (24).
9.
Install plate (23), two washers
(22), nuts (21) and bolts (20).
Tighten two nuts (21) to 28 ft-lb
torque.
Go to Sheet 6
10-125
Figure 10-152.
Figure 10-153.
