TM 5-3805-261-34
HYDRAULIC SYSTEM MAINTENANCE.
10-20.
Scarifier Cylinder. (Sheet 2 of 5)
REMOVAL
1.
Remove and discard tie (1, Figure
10-147) from scarifier cylinder.
NOTE
All hose and tube assemblies
must be tagged before
disconnecting to aid in
installation. Cap all hose
and tube ends to prevent
contamination.
2.
Disconnect hose assembly (2).
3.
Remove elbow (3) and preformed
packing (4). Discard preformed
packing (4).
4.
Disconnect hose assembly (5).
5.
Remove connector (6) and
preformed packing (7). Discard
preformed packing (7).
WARNING
Weight of cylinder is approx-
imately 65 pounds. Use
adequate hoist and sling for
lifting. Failure to follow
this procedure may cause
INJURY. If you are injured,
seek medical aid immediately.
6.
Attach hoist and sling to items 8
thru 14 as an assembly. Remove
slack from sling.
Go to Sheet 3
10-117
Figure 10-147.
