TM 5-3805-261-34
HYDRAULIC SYSTEM MAINTENANCE.
10-18.
Articulation Cylinder. (Sheet 5 of 6)
INSTALLATION
8.
Position items 19 thru 12 as an
assembly (Figure 10-136) on rear,
left side of front frame.
9.
Install three washers (11) as
required.
10.
Aline three washers (11), front
frame mountings and cylinder (19)
rod eye.
11.
Install pin (10).
12.
Install washer (9), lockwasher
(8)
and bolt (7).
13.
Install new preformed packing (6)
and connector (5).
14.
Connect hose assembly (4).
15.
Install new preformed packing (3)
and connector (2).
16.
Connect hose assembly (1).
WARNING
Only a qualified operator can
perform the next procedure.
Failure to follow this
procedure may cause INJURY.
If you are injured, seek
medical aid immediately.
17.
Start engine. Refer to TM 5-
3805-261-10.
Figure 10-136.
Go to Sheet 6
10-107
